229 files in 24 albums and 3 categories with 0 comments viewed 64,748 times
new and old springs334 viewsThese are the springs and mounts, I got this set off of ebay for $175 including $65 shipping from minnesota. The other hardware required was the bolts and blue loctite. You can use the old front mount supposedly, but your milage may vary. I never did get the shackle bolts out for the rear, so having the shackles is definitely a good idea. Besides this I would also encourage you to save two of the front mount bolts from the springs and mounts when you pull them at the yard.
246 viewsHere is the upper rad hose ( also known as the inlet hose ) removing this will assist in getting the upper shroud off,Its also a good idea to remove the intake hose off the intake as well,that will be the next pic
CP-16-100 Hydraulic Pump2174 viewsThe pump had to be rebuilt as it is a 1985 model and probably had thousands of hours on it. I sourced a rebuild kit from Florig Equipment in PA and for under $20 it was rebuilt with all new o-rings, and seals. Sorry, no pics of the actual rebuild...I forgot!
Pump in place221 viewsAdded a 2nd stock idler to make sure there is enough wrap on the alternator. The tensioner is an Auto Zone #305264 which is the same as a Dayco #89264.
351 viewsJan 27, 2011
480 viewsJust threw that in it got black interior three years ago.This was during its tranformation process.Jan 23, 2011
425 viewsI just painted it and pulled off masking tape pulled it out front for photo op.Sent pic to mom she was worried about it.She bought it new.Jan 23, 2011
480 viewsGirly man tires I used to paint it and bumper put onJan 23, 2011