Tech info and how to guides for ASV users

Last additions - Custom Work
Side view of the tank assembly.705 viewsJust a side view of the tank showing the location of the supply port as well as filter and valve.Mar 10, 2008
Quick connect fittings.693 viewsThese are the 1/2" line size quick connect fittings I am using. They are a flush design that keeps the dirt and crap out when not connected.Mar 10, 2008
Fittings in relation to winch.562 viewsThis just shows where the fittings are in relation to the winch.Mar 10, 2008
Lines installed in the winch.786 viewsHere is the initial install of the lines on the winch. I ended up reversing the lines to get the correct flow. When pulling the valve handle back I want to spool in/up and forward will be out/down.Mar 10, 2008
Completed tank assembly.519 viewsTank all painted and everything installed except for the vent line which runs into the engine compartment.Mar 10, 2008
578 viewsLots of room with the cover removed.Mar 10, 2008
Ended up cutting out the cover to fab up a new aluminum plate for mounting gauges and switches.465 viewsEnded up cutting out the cover to fab up a new aluminum plate for mounting gauges and switches.Mar 10, 2008
Pump with supply and pressure hoses installed405 viewsI installed 45 degree fittings in the pump and made up a 1" supply line and 3/4" pressure feed line. These are routed above the tranny to the inside tankMar 10, 2008
Furter view of pump and lines installed367 viewsJust a further out view of the pump and lines installed.Mar 10, 2008
Another shot of the battery location364 viewsI decided to re-install the fuse box, ECM and battery. I will be making a 12" x 12" x 18" tank to sit between the front seats.Feb 29, 2008
Here's the original tank design354 viewsJust couldn't get it to fit.Feb 29, 2008
Another view of the "L" shaped tank329 viewsThis one won't be used!Feb 29, 2008
117 files on 10 page(s) 1